TechGrow

TechGrow - Clima Micro Day / Night Fan Controller 5A is a controller that regulates the speed of your fan in two operating modes - day and night. You can easily set the desired speed with the rotary knobs, as well as a delay time of 0 to 10 minutes. The controller does not connect to a sensor and does not measure CO2, temperature or humidity!

• Very easy to use
• Adjustable fan speed for day and night mode
• Adjustable delay time up to 10 minutes
• Built-in light sensor

TechGrow - Clima Micro Plus 5A (Min speed) controls the minimum fan speed until the desired temperature in the growroom is reached or maintained. This efficient controller is easy to operate - there are only two rotary knobs - to set the minimum fan speed and the desired room temperature. There is also an option to adjust the hysteresis (1°C - 5°C).

• Controls the minimum fan speed until the desired temperature is reached or maintained
• The display shows the current temperature as well as the set temperature, fan speed, minimum and maximum measured temperature and hysteresis
• The LED indicates a stable climate or high temperature
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15°C - 35°C
• Hysteresis setting range: 1°C - 5°C
• Minimum required sensor: TempProbe (not included)

The Humi Heavy is specially designed for controlling powerful dehumidifiers. Thanks to the extra heavy components, this controller can switch devices up to 10А.

• Power supply: 100 to 240V
• Mains frequency: 50 to 60Hz
• Own Consumption: 3W
• Switching capacity: 2300W / 10A
• Setting range RH set: 10 – 90% R.H.
• Setting range RH +/-: 0 – 5% air humidity

TechGrow Clima Control ECO 8A can control up to 2 fans and precisely creates the desired climate in your indoor garden. It accelerates more slowly than other controllers to achieve a more stable climate. With the rotary knobs, you can easily set the desired temperature and hysteresis, as well as the minimum and maximum fan speed.

key functions:

• controls and displays: temperature
• day/night detection: no
• light sensor: no
• heater relay: no
• temperature alarm: no

software functions:

• temp. range: 10 - 45°C
• temp. hysteresis: 0 - 7°C
• temp. settings: day
• humidity settings: no
• day/night delay: no
• min. max. values: no

power supply

• power supply: 100 - 240V
• consumption: 3W
• fuse: 8A
• max. load: 1700W
• power cable: 3 x 1.5 / 1.7m

TechGrow Clima Control ECO 15A can control up to 2 fans and precisely creates the desired climate in your indoor garden. It accelerates more slowly than other controllers to achieve a more stable climate. With the rotary knobs, you can easily set the desired temperature and hysteresis, as well as the minimum and maximum fan speed.

key functions:

• controls and displays: temperature
• day/night detection: no
• light sensor: no
• heater relay: no
• temperature alarm: no

software functions:

• temp. range: 10 - 45°C
• temp. hysteresis: 0 - 7°C
• temp. settings: day
• humidity settings: no
• day/night delay: no
• min. max. values: no

power supply

• power supply: 100 - 240V
• consumption: 3W
• fuse: 15A
• max. load: 3400W
• power cable: 3 x 1.5 / 1.7m

Control the climate in your grow room effectively with TechGrow’s Clima Control 7A.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7 Amp / 1700W
• Adjustment range ТМР: 10 - 50°C
• Adjustment range ТМР hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to + 5°C 

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 7A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 7 Amp / 1700W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

Effectively control the climate in your grow room with TechGrow’s Clima Control Plus 7A - both day and night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7 Amp / 1700W
• Adjustment range TMP set: 0 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to +5°C

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 14A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 14 Amp / 3400W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

Control the climate in your grow room effectively with TechGrow’s Clima Control 14A.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 14 Amp / 3400W
• Adjustment range TMP: 10 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range TMP offset: -5 to + 5°C 

The Day/Night Fan Controller 7A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 8A
• triac: 12A
• power cable: 3 x 0.75 / 1.7m

Note: no connection for sensors available!

The Day/Night Fan Controller 14A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 15A
• triac: 24A
• power cable: 3 x 1.5 / 1.7m

Note: no connection for sensors available!