Timers and Controllers

Torin Sifan Aric 16A is a fan controller that regulates the voltage using microprocessor technology (digital transformer control).

• can control up to 3 fans
• working temperature: 0 - 40°C
• 1-phase power supply: 230 VAC ± 10%
• frequency: 50/60 Hz
• max. current: 16A
• length of power cable: 1.5m
• length of temp. sensor: 5m
• temp. range (Tset): 0 - 40°C

The Neptune Hydroponics CO₂ controller is automatically calibrated device and has an optimal operating range of 10 to 50Cº, 10 to 70% RH. The digital display and light sensor allow easy adjustment and maintenance of the set carbon dioxide level, with no supply at night. The controller can control both CO₂ bottles and burners.

• CO₂ measurement range: 0 - 2000ppm
• calibration: automatic calibration system
• highest CO₂ setting by default: 820ppm
• lower CO₂ setting by default: 780ppm
• consumption: 1.8W

PLANTiT Water Timer is perfect for

• Powered by two 1.5v AAA alkaline batteries (not included)
• Waterproof
• Comes with a selection of fittings and inline filter
• Working pressure range: 0-150 PSI (0-10 BAR)

Water Flow Meter – Water flow meter for precise flow control

Short description:

• Precision: Measures water flow in liters and gallons.
• Large LCD screen: Displays partial and total liters for complete control.
• Convenience: Connects directly to the tap or irrigation shuttle.

Cornwall digital timer suitable for controlling small loads ( pumps, fans , etc. ., CFL and LED bulbs). The plug in of HPS / MH over 600W is not recommended! 

• Voltage: 230V, 50HZ
• Max.load: 16A
• Min. Setting time: 1 minute
• Accuracy: ± 1min/mon
• Backup-Battery: NIMH 1.2V  >100 hours

Suitable for timing on 1x600W HID ballasts or up to 6x200W CFL. 

Lumatek Control Panel (HID) is a digiatl lighting controller, one of the best on the market right now, which monitors room temperatures, light timing, automation, safety control and dimming.

• controls up to 400 ballasts 
• can be connected to Lumatek dimmable ballasts 315W, 600W, 630W and 1000W
• power dimming range: 60-100%
• personalized sunrise & sunset
• safety and temperature control mechanisms
• intelligent room maintenance

LUMATEK Digital Panel PLUS 2.0 (HID+LED) is a digital lighting controller that can control all Lumatek LED lighting fixtures , drivers and ballasts. Using innovative technology, this controller intelligently monitors room temperatures, daylight hours and safely controlled dimming and on/off lighting.

• controls up to 400 ballasts or 100 LED drivers
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• compatible with all Lumatek ballasts: 315W , 600W , 630W and 1000W
• compatible with all Lumatek LED drivers: 90W , 120W , 465W , 600W and 1000W
• temperature sensor for monitoring and control
• automated temperature regulation by dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• warranty: 3 years