Timers and Controllers

Suitable for timing on 1x600W HID ballasts or up to 6x200W CFL. 

Lumatek Control Panel (HID) is a digiatl lighting controller, one of the best on the market right now, which monitors room temperatures, light timing, automation, safety control and dimming.

• controls up to 400 ballasts 
• can be connected to Lumatek dimmable ballasts 315W, 600W, 630W and 1000W
• power dimming range: 60-100%
• personalized sunrise & sunset
• safety and temperature control mechanisms
• intelligent room maintenance

Cornwall power control dimmer

Technical Specifications:

• Power: 280W
• Voltage: 230V
• Frequency: 50Hz
• Fuse specification: 1.6A

How to use the Dimmer:

1. Plug the dimmer into the mains.
2. Connect the device to the dimmer.
3. The dimmer’s light will show if the power is on.
4. Adjust the power with the selection wheel.

Cornwall Temperature Controller, ideal to stabilize the crop’s temperature. Suitable for air conditioning or heating devices, depending on the chosen function.

• Voltage: 230V AC/50HZ
• Total load: 16A 3680W 
• Inductive load: 2A 460W
• Operating temperature: 0ºC - 40°C
• Storage temperature: -10°C - 50°C
• Temperature range: 5°C - 30°C / 40°F - 85°F
• Precision: ±1°C / ±3°F 
• Measuring interval: 10 sec

Cornwall Humidity Controller is the ideal device to provide your crop with the optimal humidity. Connect your humidifier or extractor and set the desired humidity. The controller will take care of the rest.

• Voltage: 230V AC / 50HZ
• Maximum load: 16A 3680W
• Inductive Load: 2A 460W
• Operational Temperature: 5ºC - 40°C
• Storage Temperature: -10°C - 50°C
• Humidity Control Range: 20% - 90%
• Precision: ±5%
• Measuring Interval: 10 sec
• Temperature range: 0°C - 40°C / 32°F - 104°F

The CO ₂ desktop measuring station helps to monitor all climate parameters in your greenhouse . It is used to measure the CO ₂ concentration, temperature and relative humidity of the air with a visible LED alarm. It is the ideal device for monitoring the air quality in your indoor garden.

• large LCD-display that simultaneously shows: CO ₂ concentration , temperature and relative air humidity , calendar (m/d) and time (clock)
• desk stand, can be mounted on a wall or hung between plants
• stores min/max measurements
• records the measurements taken on an SD card (8GB included)
• 6 emoticons indicating room CO2 levels (350/450/700/1000/2500/5000ppm) for easy CO2-concentration
• automatic calibration function
• red indicator ( Alarm ); green indicator ( Save data )

The Lighthouse wireless thermostat is ideal for most heating appliances. This includes infrared heaters , tube heaters , " blower " stoves, underfloor heating and mobile radiators , as well as various types of cooling appliances .

• Plug and Play ( just connect it to the power grid and turn it on , no installation required )
• automatic wireless connection between the movable thermostat and the switch
• possibility to choose a " heating " or " cooling " function, depending on the preferred device for use
• built-in temperature sensor
• multi-channel - one movable thermostat can control several switches
• removable design suitable for placement or wall mounting
• shows current and desired temperature in degrees ºC or ºF
• LCD backlight with battery life-saving automatic shutdown
• low battery warning

GSE Temperature and minimum speed controller 5A controls the speed of one or more exhaust fans used in indoor growing.

• maintains a constant temperature in the room
• creates a continuous min. speed to prevent the release of odors
• max. current: 5.0A
• max. load: 1150W
   

Range of settings:

• temperature: 20C° to 30C°
• min. speed: off, 20% to 100%

The controller maintains a constant set temperature and prevents operation below the specified minimum speed, as well as operation above the permitted maximum speed.

Temperature, minimum speed and negative pressure controller.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• Digital sensor 5V measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to 100%
• Negative pressure: 100% to 50%

GSE Temperature minimum speed controller 10A controls the speed of one or more exhaust fans used in indoor growing.

• maintains a constant temperature in the room
• creates a continuous min. speed to prevent the release of odors
• max. current: 10.0A
• max. load: 2300W

Range of settings:

• temperature: 20C° to 30C°
• min. speed: off, 20% to 100%