Timers and Controllers

This completely redesigned controller is now easier to use and compatible with many other TechGrow products. TechGrow T-Mini Pro CO₂ Controller measures, controls and displays the CO₂ value and registers min/max values. It come with a built-in light sensor to automatically switch between day and night modes. There is no CO₂ dispensing during the night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50 ppm)
• (hysteresis/bandwidth)
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

This completely redesigned controller is just as easy to use as the other TechGrow devices with which it is compatible. The TechGrow T-1 Pro CO₂ Controller measures and controls the CO₂ value in an area. It automatically switches between day and night modes by means of the external sensor.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200 ppm (advice 50 ppm)
• (hysteresis/bandwidth)
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

TechGrow T-2 Pro CO₂ Controller7A is an unparalleled device that controls the CO₂ value, temperature and humidity in your growing area.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Maximum power fan: 7 Amp / 1700W
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50ppm)
• Adjustment range RH set: 10% - 90% RH 
• Adjustment range RH +/-: 0% - 10% RH 
• Adjustment range TMP set: 0 - 45°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

TechGrow T-2 Pro CO₂ Controller 14A is an unparalleled device that controls the CO₂ value, temperature and humidity in your growing area.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Maximum power fan: 14 Amp / 3400W
• Maximum power CO₂ source: 6A / 1500W
• Maximum total power: 16A
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50ppm)
• Adjustment range RH set: 10% - 90% RH 
• Adjustment range RH +/-: 0% - 10% RH 
• Adjustment range TMP set: 0 - 45°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

TechGrow - Clima Eco 5A (Minimum speed) controls the minimum fan speed until the desired temperature in the growroom is reached or maintained. This budget controller is easy to operate with - there are only two rotary knobs - to set the minimum fan speed and the desired room temperature.

• Controls the minimum fan speed until the desired temperature is reached or maintained
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15° - 35°C
• Hysteresis: 2°C
• Minimum required sensor: TempProbe (not included)

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

TechGrow Clima Eco 5A (Temp-RH) controls the minimum fan speed until the desired temperature and relative humidity in the growroom are reached or maintaned. This budget controller is easy to operate with - there are only three rotary knobs - to set the minimum fan speed, for the value of relative humidity and for the desired room temperature.

• Controls the minimum fan speed until the desired temperature and relative humidity are reached or maintaned
• Minimum fan speed setting range: 10% - 100%
• Relative humidity setting range: 40% - 90%
• Temperature setting range: 15° - 35°C
• Hysteresis: 2°C
• Minimum required sensor: Sensor Temp / RH (not included)

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

TechGrow - Clima Micro Day / Night Fan Controller 5A is a controller that regulates the speed of your fan in two operating modes - day and night. You can easily set the desired speed with the rotary knobs, as well as a delay time of 0 to 10 minutes. The controller does not connect to a sensor and does not measure CO2, temperature or humidity!

• Very easy to use
• Adjustable fan speed for day and night mode
• Adjustable delay time up to 10 minutes
• Built-in light sensor

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.