Timers and Controllers

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 7A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 7 Amp / 1700W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

Effectively control the climate in your grow room with TechGrow’s Clima Control Plus 7A - both day and night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7 Amp / 1700W
• Adjustment range TMP set: 0 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to +5°C

Hager Power Panel 48x600w, 8x continu en 3x kachel/heater

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 14A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 14 Amp / 3400W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

Control the climate in your grow room effectively with TechGrow’s Clima Control 14A.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 14 Amp / 3400W
• Adjustment range TMP: 10 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range TMP offset: -5 to + 5°C 

Effectively control the climate in your grow room with TechGrow’s Clima Control Plus 14A - both day and night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 14 Amp / 3400W
• Maximum heater capacity: 14 Amp / 3400W
• Maximum total capacity: 16A
• Adjustment range TMP set: 0 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to +5°C

The Day/Night Fan Controller 7A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 8A
• triac: 12A
• power cable: 3 x 0.75 / 1.7m

Note: no connection for sensors available!