LED lighting

Introducing the smartest, most powerful and most efficient LED lighting on the market! DIMLUX XTREME SERIES LED 1000W+NIR.

Dimlux Xtreme Series LED 1000W + NIR produces ultra-high PPFD levels of 3059μmol/s , evenly distributed over an area of 1.7 x 1.7m . It emits a full growing spectrum , consistently producing high-yielding , high-quality crops. Dimlux Xtreme Series LED 1000W + NIR can be dimmed without loss of efficiency, the spectrum and power can be programmed depending on the time of day and the growth stage of the cultivated crop.

• power: 1065W at 230-240V
• total light emission (PPF 350-800nm): 3059μmol/s
• total photon efficiency (PPF 350-800nm): 2.9μmol/J
• roof area: 1.7 x 1.7m
• optics: patented lens with deep penetration and ultra high transmittance
• additional light: patented multi-color light tube 65k
• built-in Doppler proximity sensor
• control: built-in (through the display) or with Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink

Forget about switchboard, timer-box and relays! Dimlux lighting fixtures can be plugged directly into the outlet ! Just set the on and off times and your lighting is ready to go!

Dimlux Maxi Controller is a modular system for controlling Dimlux lighting , fan and heating . It can control up to 160 Dimlux luminaires or ballasts. You can set the desired brightness using the + and - buttons. The Maxi controller controls and monitors CO ₂ , plant temperature and vapor pressure deficit ( VPD ) depending on the selected connected sensors. Why choose Dimlux Maxi Controller?

1. Gradual to continuous variable dimming.
2. Create optimal conditions for growing your crop.
3. Advanced connectivity and control capabilities.
4. Simulates sunrise and sunset .
5. Datalog function (permanent recording of measured data)

The Dimlux temperature sensor allows the Dimlux Maxi Controller to dim the lights based on the ambient temperature in the grow room. If the set value is exceeded, the lights will dim to keep the temperature under control. If the temperature remains elevated despite dimming, half of the dimmed lights will be turned off in a checkerboard pattern. If the temperature continues to rise, all lights will be turned off for at least 20 minutes .

• measures the temperature levels in the room
• precise and professional equipment
• 10m cable

The Dimlux Humidity (RH) Sensor displays the ambient humidity in real time on the Dimlux Maxi controller . If the relative humidity sensor is connected, you can also connect a humidifier to the Maxi controller. If you want the vapor pressure deficit (VPD) * to be displayed, a plant temperature camera and the Dimlux temperature sensor will also be required.

• measures relative humidity levels in the room
• precise and professional equipment
• 10m cable

*Note: see what Vapor Pressure Deficiency (VPD) is in the detailed description.

Plant temperature is more important than ambient temperature! When the camera is connected, the climate can be controlled based on the temperature of the plant. If the temperature of the plant gets too high, the Dimlux Maxi Controller will dim the lights to keep the stomata open. In the event of a water shortage (e.g. due to a faulty pump) the lights are also dimmed or switched off to prevent crop damage.

• infrared heat detection camera
• extremely precise environmental control
• allows the Dimlux Maxi Controller to calculate VPD*
• used by the professional horticulture industry
• very easy to install – plugs right into the Dimlux Maxi Controller
• 10m cable

*Note: see what Vapor Pressure Deficiency (VPD) is in the detailed description.

The Dimlux Aux Box connects to the Dimlux Maxi Controller via the controller's aux port, thus turning it into a fully automatic air conditioning system . The Dimlux Aux Box has two connections - one for a heater or heater and one for a humidifier or dehumidifier . The control is electronic and there is no annoying buzzing.

Lux-Rooting V.2 power cable for LED seedling lamp Lux-Rooting TL LED V.2 24W 120cm 6500K 2.3μmol/J .

• length: 1.5m
• plug: yes
• IP65 protection

LUMATEK LED Driver Remote Use 5m Extension Cables (x2). These two 5m long extension cables are designed to connect the Lumatek driver and LED fixture, in case the driver is used remote and away of the fixture. Allowing a stable and precise connection without any interference these product is composed by 2 elements:

• 5m Extension Power Cable for LED driver
• 5m Extension Dimming Cable

Lumatek Daisy-Chain 5m. Control cable is designed to daisy-chain your LUMATEK Controllable LED Fixtures allowing a stable and precise connection without any interference.

• length: 5m

Secret Jardin Cosmorrow 100W Blooming is a complete set of diode / LED lighting for the flowering phase of plants grown indoors. Patented modular technology allows individual bands to be swapped out (in case you want to add another spectrum).

• for flowering
• power: 100W
• voltage: 24V
• efficiency: 2.4µmol/s
• roof area: 60 x 60cm (when hanging 15cm from the top of the plants)
• ability to adjust power: yes
• waterproof: IP65
• strong and resistant to falling
• dimensions L/W/H: 50 x 40 x 6.5 cm
• warranty: 1 year

Note: The kit includes a power supply!

Secret Jardin TLED 26W L54cm Blooming is a single LED strip for the flowering phase of plants grown indoors. Ideal for additional vertical lighting for the plants in your tent.

• for flowering
• power: 26W
• efficiency: 2.0µmol/s
• cover area: 60 x 40cm (when hanging 15cm from the top of the plants)
• protection: IP54
• life: + 50,000 hours
• warranty: 1 year
• power cord: yes

Secret Jardin TLED 26W L54cm Blooming is a single LED strip for the flowering phase of plants grown indoors. Ideal for additional vertical lighting for the plants in your tent.

• for flowering
• power: 42W
• efficiency: 2.0µmol/s
• roof area: 120 x 60cm (when hanging 15cm from the top of the plants)
• protection: IP54
• life: + 50,000 hours
• warranty: 1 year
• power cord: yes