Bluelab

The Bluelab Nutrient Meter is designed for hydroponic crops that require a higher than normal level of EC or CF (electrical conductivity or nutrient solution concentration) during their growing cycle.

 

• completely waterproof
• The length of 40.7cm allows for convenient mixing of the nutrient solution directly in the tank!
• Does not require calibration (factory calibrated)!
• Provides measurements in EC , CF, ppm700 and ppm500 scales
• Auto on/off function
• 5 years warranty
• EC measurement range: 0.2 - 3.6
• EC measurement accuracy: ± 0.1 at 25°C

Take quick measurements of the pH and temperature of your solution with the Bluelab pH pen !

 

• completely waterproof
• simple two-point calibration
• 1 year warranty
• Auto-off function to extend battery life
• 1 x AAA alkaline battery (included)
• pH measurement range: 0.0 - 14.0
• accuracy: ± 0.1 at 25°C

Take quick measurements of the EC and temperature of your solution with the Bluelab Conductivity pen!

 

• completely waterproof
• simple one-point calibration
• 1 year warranty
• Auto-off function to extend battery life
• 1 x AAA alkaline battery (included)
• EC measurement range: 0.0 - 10.0
• accuracy: ± 0.1 at 25°C

The Bluelab Combo Meter is everything you need for simple and reliable growing of your crop!

 

• easy to use, clean and calibrate
• measures pH , conductivity (EC, CF, ppm700 and ppm500) and temperature (°C, °F) of the nutrient solution
• simple two-point calibration (pH)
• Does not require calibration of the conductivity/temperature probe (factory calibrated)!
• 2-meter cable for measuring in hard-to-reach places
• Bluelab pH Probe : included
• appliance warranty: 5 years
• Probe warranty: 6 months

The Bluelab Combo Meter is not waterproof , but will withstand occasional splashes of water! If the device does get splashed, dry it as quickly as possible!

The Bluelab Multimedia pH Meter allows for pH measurement directly in the root zone , regardless of the growing medium - soil , expanded clay , coco , mineral wool or nutrient solution .

 

• hardened sensor tip for measurements directly in the root zone
• easy two-point calibration with 30-day active period indicator
• LCD display with backlight
• low battery indicator
• automatic shut-off function
• 2 x AAA alkaline batteries ( included )
• Probe cable length: 2m.
• appliance warranty: 5 years
• Probe warranty: 6 months

 

The Bluelab Multimedia pH Meter is not waterproof , but will withstand occasional splashes of water. If the device does get splashed, dry it as quickly as possible!

Bluelab Guardian Monitor allows you simply and effectively to measure pH, conductivity and temperature of the nutrition solution in your reservoir.

 

• Replaceable Bluelab pH probe included
• Bluelab pH probe cable length: 2m
• No calibration required for the conductivity/temperature probe (factory calibrated)
• Waterproof design
• 2 year warantee for the device
• 6 month warantee for Bluelab pH probe

 

Measurement range:

 

• pH: 0.0 - 14.0
• EC: 0.0 - 5.0
• CF: 0 - 50
• ppm 500 (EC x 500): 0 - 2500TDS
• ppm 700 (EC x 700): 0 - 3500ppm
• temperature: 0 - 50°C / 32 - 122°F

 

Accuracy (at 25°C / 77°F):

 

• pH: ± 0.1
• EC: ± 0.1
• CF: ± 0.1
• ppm 500 (EC x 500): ± 50TDS
• ppm 700 (EC x 700): ± 70ppm 
• temperature: ±1°C / ± 2°F

 

 

With Bluelab Guardian Monitor Connect you can now record the measurements data about pH, condutcivity and temeprature of the solution and view them remotely while you are not in the grow room/greenhouse.

 

• Store your data on a single Bluelab Connect Stick (sold separately)
• Free Bluelab Connect Software here
• Replaceable Bluelab pH probe included
• Bluelab pH probe cable length: 2m
• No calibration required for the conductivity/temperature probe (factory calibrated)
• Waterproof design
• 2 year warantee for the device
• 6 month warantee for Bluelab pH probe

 

Measurement range:

 

• pH: 0.0 - 14.0
• EC: 0.0 - 5.0
• CF: 0 - 50
• ppm 500 (EC x 500): 0 - 2500TDS
• ppm 700 (EC x 700): 0 - 3500ppm
• temperature: 0 - 50°C / 32 - 122°F

 

Accuracy (at 25°C / 77°F):

 

• pH: ± 0.1
• EC: ± 0.1
• CF: ± 0.1
• ppm 500 (EC x 500): ± 50TDS
• ppm 700 (EC x 700): ± 70ppm 
• temperature: ±1°C / ± 2°F

 

 

The Bluelab pH Controller monitors and adjusts the pH levels of your nutrient solution for you!

 

• Automatic control and monitoring of pH in tanks up to 7600l.
• Large and easy-to-read display with green backlight
• Easy-to-navigate programming and setup menu
• Easy pH calibration using on-screen instructions
• Flashing alarms for low or high values
• Dosing interlocks to protect against overdosing
• Automatic resumption of dosing upon restart in case of power failure
• Waterproof design with wall mount option
• 4m alkali-resistant tube for dosing pH regulator
• Use with undiluted pH regulator
• Bluelab pH Probe   probe: included
• Replaceable peristaltic pump and tubing
• Warranty for the device and temperature probe: 2 years
• Bluelab pH Probe warranty   probe: 6 months

The Bluelab PeriPod M3 allows for automated maintenance of ideal pH and nutrient levels in your tank!

 

• 1x 120ml/min peristaltic pump for dosing pH adjustment solutions
• 2x 120ml/min peristaltic pumps for nutrient dosing
• robust housing and wall mounting option
• individual pump filling and calibration
• replaceable peristaltic pumps and tubes
• 4 m. alkali-resistant tubes for dosing pH regulator
• 2x 4m. tubes for nutrient solution dosing
• compatible with most modern growing systems, including recirculating and standard drain systems
• compatible with Bluelab Pro Controller

 

* Please note: Only M-series pumps (M3 and M4) can be connected together. L3 can only be connected to other L3s.

The Bluelab Connect Stick is a USB flash drive that allows recording of nutrient solution measurements and wireless monitoring.

 

• Ability to record data taken [when used with Bluelab Connect products (sold separately)]
• Download and install Bluelab Connect software for FREE
• Monitor data and its current status via Google Docs (requires a computer with constant internet access)
• 2 years warranty

Bluelab pH Probe is a replacement pH measuring probe suitable for use with   Bluelab pH Meter , Bluelab Combo Meter and Bluelab Guardian Monitor .

 

• completely waterproof
• 2-meter cable for measuring in hard-to-reach places
• fast and accurate measurements
• polycarbonate housing for long-lasting use
• effective in solutions with an EC of 0.2 and higher
• warranty: 6 months

 

Use with the included KCl storage cap to extend the life of the probe!

The Bluelab Leap pH Probe is a replacement pH probe for the Bluelab Multimedia pH Meter or the Bluelab Combo Meter . The probe allows you to measure pH directly in the root zone , regardless of the growing medium - soil , expanded clay , coco , mineral wool or nutrient solution .

 

• The probe tip is made of durable tempered glass, allowing for quick measurements in any environment!
• completely waterproof
• fast and accurate measurements
• warranty: 6 months

 

Use with the included KCl storage cap to extend the life of the probe!